Introduction

Features

• SWL 95 kg (209 lbs)

  The F50 uses heavy-gauge components to take the weight, and a linear drive with twin drive shafts to power the vertical motion.

• All Parts in One Box

  The new F50 range has all components – including the wall mount – in one box. 

• Wired Control or RS-232

  A wired remote control is included with simple up and down functions. It fixes to the rear of the display with an adhesive sticker. Alternatively, use a control system to activate the F50 via RS-232 and add pre-set positions, and upper and lower limits.

• Highly Adjustable Wall Brackets

  We include two brackets to fix the lower part of the F50 to the wall, which slide up and down slots so they can be located at just the ideal height. These secure the column almost flush to the wall or standing off up to 140 mm (5.5″). Note: if only one wall bracket can be fixed to a load bearing structure, the column must be fixed to the floor.

• Feet or Fixed

  Adjustable feet are included to make it easy to adjust level, or remove the feet and fix the column to the floor.

• Hide Mess

  Generous cable entry holes make routing cables quick and easy. The front cover can be removed for end users to easily access anything they need. There is also plenty of space to hide cables, media players, mini PCs, and power distribution boards inside the column.

• VESA 800 x 600

  This product includes Vision’s heavy-duty 800×600 wall mount, which fits most large-format flat panels from 47-100″ subject to VESA pattern and weight limit. If your display has an alternative VESA pattern, Vision’s other heavy-duty wall mounts (VFM-W4X4, VFM-W6X4, or VFM-W10X6) also fit the F50 stand.
  

• Landscape or Portrait

  All of these VESA mount options support portrait or landscape orientation.

• Optional Laptop Shelf

  The optional shelf fixes onto the horizontal part of the wall mount at four different heights in 80 mm (3.1″) increments. The shelf platform is 450 mm (18″) wide by 306 mm (12")  deep. At the lowest height setting the shelf is 680 mm (27″) below the centre of screen. Part Number: VFM-WLS

• Optional Video Conference Shelf

  The optional video conference shelf fixes in the centre above or below the display. It will accommodate cameras such as the Logitech Rally* or Meetup, Yamaha YVC-1000, or Barco Clickshare CSE-200 base stations. Thanks to the VESA100 holes on the vertical section, additional products, such as iPad enclosures, can be fixed above or below the display. Part Number: VFM-WVC

  * Logitech Rally speakers can be fixed in place with an additional bracket added to the VFM-WVC. Part Number: VFM-WVC /RSB

• 800 mm / 31.5" Motorised Height Adjustment

  The height of the display can be altered to suit the audience thanks to motorised height adjustment. 

• Increased Safety

  If there is obstruction under the display as it is lowered, the weight of the display simply rests on top of the obstruction. It does not pull down and crush the obstruction. There is safety sensor which sensors obstacles and will stop the motor. 

• Compatible with Surface Hub

  Spacers are included to work with the 85" Microsoft Surface Hub.