Vision’s Vision Flat-Panel Mount – Wall Arm range is tough and flexible. The VFM-WA2X2 fits any flat-panel LCD or LED screen which has 100 x 100 mm, 200 x 200 mm, or 200 x 100 mm rear mounting holes.
Up to 42″
Most displays up to 42″ use VESA 100 or 200 mounting points, so the WA2X2 fits the majority of displays up to this size. If a larger display has the correct mounting points and weighs less than the SWL this mount can support it safely.
The mounting plate fixes to the back of the display, then just drop the display into place on the wall arm and lock in place with a single nut.
Didn’t fix the wall plate perfectly plumb? No problem! 6° of rotation allow you to get the display level easily once the display is in place.
SWL 25 kg
This mount has a “safe working load” of 25 kg (55.1 lb). It is made of steel to make it robust.
Tilt and Swivel
-2-12° tilt and 90° swivel. Use this mount to fix a display in a corner up high in a waiting room, or fix displays around an office.
The VESA standard is based on how far apart the mounting holes are on the back of your flat-panel. Holes 200 x 200 mm apart are known as VESA 200 and will suit this mount. This product also fits displays with smaller VESA sizes listed below.
PRODUCT DIMENSIONS: see image
PACKAGED DIMENSIONS: 342 x 290 x 60 mm / 13.5″ x 11.4″ x 2.4″ (length x width x height)
PACKAGED WEIGHT: 3.0 kg / 6.6 lbs
SAFE WORKING LOAD: 25 kg (55.12 lbs)
Wall plate: 2.5 mm cold-roll steel
Display plate: 2.5 mm cold-roll steel
200 × 200 mm
200 x 100 mm
100 × 100 mm
4 x M4 12 mm screw
4 x M4 25 mm screw
4 x M5 12 mm screw
4 x M5 25 mm screw
4 x M6 12 mm screw
4 x M6 25 mm screw
4 x M8 16 mm screw
4 x M8 25 mm screw
WARRANTY: Lifetime return-to-base
ORDER PART CODE: VFM-WA2X2V2 [EU SAP: 4684962 / US SAP: 13293713]