For 99% of professional AV installations the same set of modules are required, so Vision offer a simple package that contains a basic selection of modules as a starting point. Just select the length of the cable package you need to go with it from:
- 3m (9 ft)
- 5m (16 ft)
- 10m (33 ft)
- 15m (49)
A “surround” which comes in two parts fits to a backbox (or “mudring” if your wall is hollow), then the modules fix in place to complete the installation. Techconnect is based around standard UK backbox sizes, and Vision also offers mounting hardware for other countries.
Improved Fit and Finish
Techconnect3 has more space behind the modules stash cables, and narrower and more even gaps between modules.
Pure white with a chiselled profile, Techconnect3 also has 11 mm of flat space above and below the connectors for information or company branding stickers.
Techconnect3 has shorter modules and extra ribbing to reduce module flex. On parts where flex is desirable to avoid shattering ABS plastic is used.
Passive and Active Modules
Vision offer pass-through modules for AV, IT, and pro-audio applications, and active modules which boost USB or extend HDMI, VGA, and USB signals over CAT6 cable.
You can even install a powerful audio amplifier module or a universal controller module right next to the connectivity modules. The faceplate is close at hand and securely fastened in place.
Vision offer professional cables. VGA, Phono (RCA), and Minijack Techconnect cables have phoenix connectors on one end which plugs right in to the rear of the modules. These phoenix connectors can easily be removed to pull cables.
Vision’s VGA cable included the SDA and SCL data lines to support EDID handshakes which allows the display device to communicate its supported display modes.
Module Package Contents
1 x 2-Gang UK Backbox (surface mount) 146 x 86 x 45mm / 5.7″ x 3.4″ x 1.8″ TC3 BACKBOX2G [SAP:3446598]
1 x VGA with Minijack TC3 VGAF3.5MM [SAP:3446585]
CARTON DIMENSIONS: 160 x 950 x 60 mm (6.3″ x 37.4″ x 2.4″)
PACKAGED WEIGHT: 0.3 kg /0.66 lb
MODULE COMPLIANCES: RoHS, WEEE & CE
ORDER PART CODE: TC3-PK [SAP: 3446594]
Cable Package Contents
1 x VGA
White, Ferrite core to stop RF interference. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of module. Gold-plated male to male HD15 (15 pin) connector. Sheath PVC, outer diameter: 8.0 mm, Conductor thickness: 28AWG, Drain wire laid between aluminum mylar and braid, Al-Mg alloy wire overall, >65% coverage braided shield. Impedance: at 10MHz, 75Ω (coaxial cable), Resistance 20℃(Ω/1000m) 237.25.
TC2 3MVGA [SAP:3000667]
TC2 5MVGA [SAP:2042118]
TC2 10MVGA [SAP:1461166]
TC2 15MVGA [SAP:1461168]
High-grade white installation cable. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of a Techconnect faceplate module.
TC2 3M3.5MM [SAP:3000665]
TC2 5M3.5MM [SAP:2042096]
TC2 10M3.5MM [SAP:1461164]
TC2 15M3.5MM [SAP:1474524]
White, 4K compliant, High-Speed (Category 2) with Ethernet, HDMI 1.4, Gold-plated HDMI-A connectors, Sheath: outer diameter: 9.5mm, Conductor thickness: ≤ 5 m 28 AWG (American Wire Gauge) / 10 m 26 AWG / 15 m 24 AWG. Sheath outer diameter: ≤ 5 m 7.3 mm (≤16.4 ft 0.29″) / 10 m 8.0 mm (32.81 ft 0.31″) / 15 m 9.5 mm (49.21 ft 0.37″).
TC2 3MHDMI [SAP:3000666]
TC2 5MHDMI [SAP:2746863]
TC2 10MHDMI [SAP:2746864]
TC2 15MHDMI [SAP:2746865]
3/5m Cable Package: 200 x 200 x 90mm (7.87″ x 7.87″ x 3.54″)
10m Cable Package: 220 x 220 x 120mm (8.66″ x 8.66″ x 4.72″)
15m Cable Package: 250 x 250 x 140mm (9.8″ x 9.8″ x 5.51″)
3m Cable Package: 1.0kg / 2.2 lb
5m Cable Package: 1.35kg / 2.97 lb
10m Cable Package: 2.2kg / 4.85 lb
15m Cable Package: 3.73kg / 8.22 lb
ORDER PART CODE:
Module Package Bundled With Cable Packages: