Flat Panel Floor Stand

The F31 uses heavy-gauge components to take a safe working load (SWL) of up to 130kg (286 lbs).

Fits most displays from 37-90″ subject to VESA pattern and weight limit. Note: curved screens are not supported by this mount.

The columns move up and down with 800 mm / 31.5″ of range. With no pinch-points this is a very safe design.

The tight tolerance of the telescopic legs results in no unwanted wobble at the screen.

This floor stand is slightly taller than the motorised F30; at the highest position the centre of the display is 1912 mm (75.3″) high. This height advantage makes it ideal for rental and staging applications.

A pair of brackets fix the column to the wall at multiple height positions. A short set and a long set are included, and the distance between the back of the column to the wall can be 38-133 mm (1.5-5.2″) off the wall.

The thin design holds the display close to the wall. This looks better, reduces snagging risk, and because the load is close to the wall the mount has a higher safe working load rating.

Two options are included for floor termination; a plate which can be bolted to the floor, or adjustable feet so installers can adjust the plumb-level. Both are included with the floor stand.

Cable clamps keep the cables tidy.

Media players can be fixed to the wall bracket assembly out of sight. The wall bracket has VESA 100 holes especially for this.

This product includes Vision’s heavy-duty VFM-W8X6 wall mount which fits most large-format flat panels from 37-90″. Vision’s larger VFM-W10X6 wall bracket can also fix to this column, or the smaller VFM-W6X4 and VFM-W4X4.

An optional shelf fixes at four different heights in 80 mm (3.1″) increments to the horizontal part of the wall mount. The platform is 450 mm (17.7″) wide by 306 mm (12.0″) deep. At the lowest height setting the shelf is 680 mm (26.8″) below the centre of screen. Part Number: VFM-WLS [EU SAP: 4857149 / US SAP: 13557610]

This shelf fixes in the centre above or below the display. It accommodates cameras such as Logitech’s Rally, and also Logitech’s Meetup, Yamaha’s YVC-1000, or Barco’s Clickshare CSE-200 base stations.

With VESA100 holes on the vertical section, products like iPad enclosures can be fixed above or below the display. Part Number: VFM-WVC [EU SAP: 5048878 / US SAP: 13557673]

The display latches into place on the floor stand. It cannot slide off and screws can be added from behind to completely lock it in place.

A rotary bearing assembly can be added, allowing the display to be turned from portrait to landscape. With the bearing the SWL of the display is limited to 45 kg / 99 lb. Part Number: VFM-WRT [EU SAP: 5432023/ US SAP tbc]