Flat Panel Floor Stand with Wheels

The F31 uses heavy-gauge components to take up to safe working load (SWL) 110kg (242 lbs).

Fits most displays from 37-90″Subject to VESA pattern and weight limit. Note: curved screens are not supported by this mount.

The columns move up and down with 800 mm / 31.5″ of range. With no pinch-points this is a very safe design.

The tight tolerance of the telescopic legs results in no unwanted wobble at the screen.

This floor stand is slightly taller than the motorised F30; at the highest position the centre of the display is 2018 mm (79.4″) high. This height advantage makes it ideal for rental and staging applications.

Two handles come with the wheel assembly to help users move the floorstand around without having to grab the display.

Cable clamps keep the cables tidy.

Media players can be fixed to the wall bracket assembly out of sight. The wall bracket has VESA 100 holes especially for this.

This product includes Vision’s heavy-duty VFM-W8X6 wall mount which fits most large-format flat panels from 37-80″. Vision’s larger VFM-W10X6 wall bracket can also fix to this column, or the smaller VFM-W6X4 and VFM-W4X4.

An optional shelf fixes at four different heights in 80 mm (3.1″) increments to the horizontal part of the wall mount. The platform is 450 mm (17.7″) wide by 306 mm (12.0″) deep. At the lowest height setting the shelf is 680 mm (26.8″) below the centre of screen. Part Number: VFM-WLS [EU SAP: 4857149 / US SAP: 13557610] 

This shelf fixes in the centre above or below the display. It accommodates cameras such as Logitech’s Rally, and also Logitech’s Meetup, Yamaha’s YVC-1000, or Barco’s Clickshare CSE-200 base stations.

With VESA100 holes on the vertical section, product’s like iPad enclosures can be fixed above or below the display. Part Number: VFM-WVC [EU SAP: 5048878 / US SAP: 13557673]

Big wheels make it easier to pull along, and reduce vibration. They even have curved corners so they are gentler on your feet.

The display latches into place on the floor stand. It cannot slide off and screws can be added from behind to completely lock it in place.

A rotary bearing assembly can be added, allowing the display to be turned from portrait to landscape. With the bearing the SWL of the display is limited to 45 kg / 99 lb. Part Number: VFM-WRT [EU SAP: 5432023 / US SAP tbc]

The feet are 615 mm / 24.2″ deep, which means they don’t protrude forward too much. This also makes it much easier to fit through a standard doorway.