Motorised Flat Panel Floor Stand with Wheels

The F30 uses heavy-gauge components to take up to SWL 110kg (242 lbs), and a powerful linear drive which moves at 16 mm (0.6″) per second.

Fits most displays from 47-90″. Note: curved screens are not supported by this mount.

The columns move up and down with 800 mm / 31.5″ of range. With no pinch-points this is a very safe design.

The tolerance of the telescopic legs is exceptional, resulting in smooth motion with no unwanted wobble at the screen.

A remote control is included with simple up and down functions, plus two programmable memory positions. Note: users should not rely on memory to lower the stand in case of harm or injury. 

Two handles come with the wheel assembly to help users move the floorstand around without having to grab the display.

A safety stop is triggered when the display lowers onto hard furnishings. Note soft items may fail to trigger the stop. Care should be taken whenever moving the display down.

Dual cable strips on the rear keep the cables tidy, and a spring-loaded reel helps keep slack cable out of sight when the display is lowered.

Media players can be fixed to the wall bracket assembly out of sight.

This product includes Vision’s heavy-duty VFM-W8X6 wall mount which fits most large-format flat panels from 47-90″. Vision’s larger VFM-W10X6 wall bracket can also fix to this column, or the smaller VFM-W6X4.

An optional shelf fixes at four different heights in 80 mm (3.1″) increments to the horizontal part of the wall mount. The platform is 450 mm (17.7″) wide by 306 mm (12.0″) deep. At the lowest height setting the shelf is 680 mm (26.8″) below the centre of screen. Part Number: VFM-WLS [EU SAP: 4857149 / US SAP: 13557610] Due into stock late 2019

This shelf fixes in the centre above or below the display. It accommodates cameras such as Logitech’s Rally, and also Logitech’s Meetup, Yamaha’s YVC-1000, or Barco’s Clickshare CSE-200 base stations.

With VESA100 holes on the vertical section, product’s like iPad enclosures can be fixed above or below the display. Part Number: VFM-WVC [EU SAP: 5048878 / US SAP: 13557673]

Big wheels make it easier to pull along, and reduce vibration. They even have curved corners so they are gentler on your feet.

The display latches into place on the floorstand.

A rotary bearing assembly can be added, allowing the display to be turned from portrait to landscape. With the bearing the SWL of the display is limited to 40 kg / 88 lb. Part Number: VFM-WRT [EU SAP tbc / US SAP tbc] Note: Due into stock late 2019

The feet are 650 mm / 25.6″ deep, which means they don’t protrude forward too much. This also makes it much easier to fit through a standard doorway. If a heavier display is to be fitted, or if it will be moved often over rough or sloping surfaces we recommend the VFM-F30/WXL which has longer feet.