Value HDMI-over-IP | Vision Audio Visual

Value HDMI-over-IP

Distributes HDMI via a network, H.264 compression
One-to-One directly or One-to-Many over LAN
IR Pass-through

  • Share on
  • or
  • HDMI-over-IP Transmitter End of Life
    EU SAP: US SAP:
    • Total 71
    • EU 44
    • UK 27
  • HDMI-over-IP Receiver End of Life
    EU SAP: US SAP:
    • Total 111
    • EU 62
    • UK 49

The TC-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications. Each receiver on a network uses a compact 18Mbps bandwidth thanks to the H.264 compression.

Features

  • Scalable

    Transmitters and receivers sold separately so you can scale your system as you wish.

  • One to Many

    Need to display one source on many screens? This product is perfect! It multi-casts, so you can have one transmitter for the source, and up to 253 x receivers can set on the network – one for each display. Only one transmitter per network.

  • Point to Point without LAN

    Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 120m (394 ft) long, or 150m (492 ft) on a high quality cable.

  • Maximum Length

    If using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.

  • Resolution

    Fully HDCP 1.2 compliant, it supports resolutions up to 1920 x 1080 (also known as 1080P).

  • Audio

    Digital audio encoded on the HDMI signal is transmitted.

  • IR Pass-Through

    Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60kHz IR signals.

  • Plug and Play

    EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.

  • EQ-Free

    The signal passes through a network without the normal skew and balancing distortion.

  • H.264 Compression

    Video is compressed using the H.264 protocol – the same type of compression used on Blu-Ray. Images are full colour with smooth motion.

  • LAN Protocols

    Despite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.

  • Dual-Power

    This product requires a power supply for each transmitter and receiver. It does not use PoE.

  • Unmanaged Switch

    Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required, so a low cost unmanaged switch can be used.

  • Multiple Sources

    If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.

Specifications

  • TRANSMITTER DIMENSIONS

    97 x 94 x 24 mm / 3.82″ x 3.70″ x 0.94″ (length x width x height)

  • RECEIVER DIMENSIONS

    as above

  • PACKAGED DIMENSIONS

    155 x 117 x 77 mm / 6.1″ x 4.60″ x 3.03″

  • PRODUCT WEIGHT

    0.145 kg / 0.31 lb per set

  • PACKAGED WEIGHT

    0.48 kg / 1.06 lb per set

  • CONSTRUCTION MATERIAL

    Metal

  • COLOUR

    White

  • LATENCY

    200 ms

  • COMPRESSION TYPE

    H.264

  • STANDARD

    IEEE-568B

  • CABLE

    CAT5E/6 Shielded or Unshielded

  • BANDWIDTH

    18Mbps per receiver

  • HDMI VERSION

    1.3 (3D not supported)

  • HDCP VERSION

    1.2

  • MAXIMUM CABLE LENGTH

    120m (394 ft)

  • CAT5E

    100m between ethernet devices

  • CAT6

    120m between ethernet devices

  • MAXIMUM RESOLUTION

    [email protected]/60Hz (1920 x 1080)

  • OPERATING TEMPERATURE RANGE

    0℃ ~60 ℃

  • OPERATING HUMIDITY RANGE

    20%~90%

  • MAX POWER CONSUMPTION TRANSMITTER

    3.5 Watts

  • MAX POWER CONSUMPTION RECEIVER

    3 Watts

  • CONNECTIVITY

    1 x HDMI (type A)
    1 x RJ45
    1 x 3.5mm Minijack (for IR pass-through)
    1 x Phoenix (for Power)

  • POWER SUPPLY

    100-240v 50/60Hz AC 5 volt / 2 amp

  • TRANSFORMER INTEGRATED INTO PLUG

  • INCLUDES INTERCHANGEABLE PLUGS

    UK/EU/US/AU

  • DC TAIL LENGTH

    1.8m

  • TRANSFORMER DIMENSIONS

    66 x 43 x 32mm / 2.6″ x 1.7″ x 1.26″

  • TRANSMITTER

    1 x IR Blaster with 1m (3.3 ft) Cable

  • RECEIVER

    1x IR Receiver with 1m (3.3 ft) Cable

  • WARRANTY

    Lifetime return-to-base

  • COMPLIANCES

    RoHS, WEEE, CE/EMC, CE/EMC Report, IEC, FCC, FCC Report, RCM/DOC, RCM/EMC Report, RCM/LVD Report, IC

  • ORDER PART CODE: TX

    TC-HDMIIPTX [EU SAP: 4234190 / US SAP: 12939504]

  • ORDER PART CODE: RX

    TC-HDMIIPRX [EU SAP: 4235162 / US SAP: 12939505]

  • SPARE POWER SUPPLY UNIT (PSU)

    TC2 P5V2A [EU SAP: 2940996/ US SAP: 13445529]

  • ORDER PART CODE

    [EU SAP: / US SAP: tba]

  • Country of Origin

    China

HDMI-over-IP Transmitter

  • ORDER PART CODE

    TC-HDMIIPTX [EU SAP: 4234190 / US SAP: 12939504]

  • Country of Origin

    China

HDMI-over-IP Receiver

  • ORDER PART CODE

    TC-HDMIIPRX [EU SAP: 4235162 / US SAP: 12939505]

  • Country of Origin

    China

Downloads

Images

TC-HDMIIPRX [EN]

(en)

TC-HDMIIPTX [EN]

(en)

Where to Buy

Select a region

Australia

Austria

Belgium

Czech Republic

Denmark

Finland

Germany

Iceland

Ireland

Italy

Netherlands

New Zealand

Norway

Portugal

South Africa

Spain

Sweden

Switzerland

United States