2 x 25w Digital Amplifier | Vision Audio Visual

Audio - Speakers
Amplifiers

2 x 25w Digital Amplifier

Part Number: SAP: EAN:
  • End of Life August 2021 Replaced by AV-1900
  • 2 x 25w RMS (at 8 ohms) low impedance digital power amplifier
  • 3 x Stereo inputs / 1 x Stereo Pre-Output / 1 x Balanced Mic input with Phantom Power
  • Bluetooth Input
  • IR remote included, RS-232 control
Stock levels @ 09-May-25
  • Total 0
Training
  • Share on
  • or

The improved AV-1800 is compact, and has a simple interface with just two dials which are turned to adjust and pushed to switch. It has a selection of inputs – including Bluetooth and a microphone input, making it suitable for meeting spaces, small auditoriums, lecture theatres, school halls, and small churches.

Features

  • Bluetooth

    The amplifier can automatically switch to the Bluetooth source when it is paired. Bluetooth can be renamed and the pin changed by connecting to a PC (see software link below).

  • Microphone Input

    It uses a professional XLR connector and the input is “balanced” to eliminate electro-magnetic noise induced on long cables. The microphone input has “Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones.

  • RS-232

    It can be controlled by a control device such as Techconnect Control via IR or RS-232. It also comes with an IR remote control gives the user bass and treble adjustment and direct input selection.

  • D-Class

    An efficient Digital-class amplifier chip dramatically reduces power consumption especially at rest.

  • 3 x Stereo Inputs

    Three stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 2 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 3 is via a 3.5mm Minijack connector, and is duplicated on the front and rear panels for easy access.

  • Line Output

    A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the front panel affects the output level.

  • Auto-Standby

    If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto-standby can be disabled.

  • Mounting Options

    Optional mounting hardware is included to allow cable-tying either to a projector ceiling pole, or into a rack.

Specifications

  • AMPLIFIER DIMENSIONS

    253 x 253 x 45 mm / 9.96″ x 9.96″ x 1.77″ (wide x deep x tall) not including dials and connectors

  • CARTON DIMENSIONS

    415 x 230 x 80 mm / 16.34″ x 9.06″ x 3.15″

  • AMPLIFIER WEIGHT

    2.0 kg / 4.4 lb

  • PACKAGED WEIGHT

    2.4 kg / 5.3 lb

  • COLOUR

    White

  • INPUTS

    3 x Stereo inputs via 2-phono (RCA) connectors / 1 x 3.5mm (1/4″) minijack
    1 x Bluetooth input
    1 x Microphone inputs via balanced XLR

  • OUTPUTS

    1 x Stereo Line-level output via phono connectors (post mix)

  • 2 X 25W @ 8 OHMS

  • TOTAL HARMONIC DISTORTION

    <1%

  • FREQUENCY RESPONSE (LINE IN)

    20Hz~20kHz

  • SIGNAL TO NOISE RATIO (LINE IN)

    75dB

  • RATING INPUT LEVEL/IMPEDANCE

    line in 800~900mV/47kohms

  • OPERATING TEMPERATURE RANGE

    0 to +40°C (32 to +104 °F)

  • POWER CONSUMPTION (RATING CONDITION)

    <=125W

  • PHANTOM POWER DISABLE

    via internal jumper

  • PHANTOM POWER

    21V

  • ACCESSORIES INCLUDED

    1 x 2-phono to 2-phono cable 2m long
    1 x 3.5mm to 3.5mm minijack cable 2m long
    2 x Unshielded Speaker Cable 5m long
    1 x UK C7 figure-8 power cable 1.8 m long
    1 x EU C7 figure-8 power cable 1.8 m long
    1 x AU C7 figure-8 power cable 1.8 m long
    1 x US C7 figure-8 power cable 1.8 m long
    1 x Remote Control (Battery included: CR2025 3V Li-Mn)
    1 x Rack ears
    1 x Ceiling pole and wall brackets

  • POWER SUPPLY

    100~240V Internal Power Supply

  • WARRANTY

    Lifetime return-to-base

  • COMPLIANCES

    RoHS, WEEE, CE/EMC, CE/LVD, RCM_SDOC, FCC_BT3.0, FCC_BT4.0, CE-RED

  • SPARE IR REMOTE CONTROL

    AV-1800 RC

  • ORDER PART CODE:

    AV-1800 [EU SAP: 4262711 / US SAP: 12928309]
    or AV-1800+CS-1900 bundle [EU SAP: 5356157 / US SAP: ]
    or AV-1800+SP-1800 bundle [EU SAP: 4363209 / US SAP: 70017411]

  • ORDER PART CODE

    AV-1800 [SAP: 4262711]

  • Country of Origin

    China

Downloads

Product PDF

AV-1800 (English)

(en)
302.75 KB
Download

Manuals

Manual en

(en)
1.70 MB
Download

Software

InstallBlueSuite 2 6 4 1046

(en)
30.98 MB
Download

Firmware

Firmware 080118

(en)
6.38 MB
Download

Certificates

CE RED certificate

(en)
101.42 KB
Download

FCC BT3.0 certificate

(en)
164.87 KB
Download

FCC BT4.0 certificate

(en)
165.24 KB
Download

RCM declaration of conformity

(en)
537.66 KB
Download

Images

AV-1800 Medium Image Pack

(en)
1.34 MB
Download

AV-1800 Thumbnails Image Pack

(en)
109.80 KB
Download

AV-1800

(en)
6.59 MB
Download

Where to Buy

Australia

Austria

Belgium

Czech Republic

Denmark

Estonia

Finland

Germany

Iceland

Ireland

Italy

Lithuania

Netherlands

Norway

Portugal

South Africa

Spain

Sweden

Switzerland

United States