Vision’s Vision Flat-Panel Mount – Wall Arm range is tough and flexible. The VFM-WA4X4 fits any flat-panel LCD or LED screen which has rear mounting holes up to 400 x 400 mm apart.
Up to 60″
Most medium-to-large displays use VESA 400 or similar mounting points, so the WA4X4 fits the majority of displays up to this size. Note: if a larger display has the correct mounting points and weighs less than the SWL this mount can support it safely.
The single-arm design makes this mount especially flexible without compromising the load capacity of 25 kg (55.1 lb).
Didn’t fix the wall plate perfectly plumb? No problem! 6° of rotation allow you to get the display level easily once the display is in place.
Tilt and Swivel
-2-12° tilt and 90° swivel. Use this mount to fix a display in a corner up high in a waiting room. Or fix displays around an office or in meeting rooms.
The VESA system defines how far apart the mounting holes are on the back of your flat-panel. Holes 400 x 400 mm apart are known as VESA 400 and will suit this mount. This product also fits displays with smaller VESA sizes listed below.
Clip-on covers allow tidy cable routing.
PRODUCT DIMENSIONS: see image
PACKAGED DIMENSIONS: 342 x 290 x 60 mm / 13.5″ x 11.4″ x 2.4″ (length x width x height)
PRODUCT WEIGHT: 3 kg (6.7 lbs)
PACKAGED WEIGHT: 3.5 kg / 7.6 lbs
SAFE WORKING LOAD: 25 kg (55.1 lbs)
Wall plate: 2.5 mm cold-roll steel
Display plate: 2.5 mm cold-roll steel
400 × 400 mm
400 x 300 mm
400 × 200 mm
300 × 300 mm
300 x 200 mm
200 × 200 mm
200 x 100 mm
100 x 100 mm
4 x M4 12 mm screw
4 x M4 25 mm screw
4 x M5 12 mm screw
4 x M5 25 mm screw
4 x M6 12 mm screw
4 x M6 25 mm screw
4 x M8 16 mm screw
4 x M8 25 mm screw
WARRANTY: Lifetime return-to-base
ORDER PART CODE: VFM-WA4X4v2 [SAP: 4727527]