Introduction

Features

• UL1678 Approved

  To get this certification the heaviest display allowable is installed, the wheels are locked, then the floor is tipped 10° in every direction; the stand mustn't tip over.  This limits to SWL of this floorstand to 45 kg.

• VESA 400x400

  This stand can take all VESA sizes up to 400 x 400 mm, including less common sizes such as 350 x 350 mm.

• Rotation

  Users can rotate freely from portrait to landscape. It uses a premium slewing ring bearing. Note: Rotation does not work with a large 65" display.

• Optimized for 50-65″

  The shape and size is optimized for displays from 50 - 65" subject to VESA pattern and weight limit.

• 7° Angle

  The display sits at a 7° angle. This reduces glare and reflection from ceiling lights, and presents a similar drawing angle to old-school flipcharts.

• 4" Wheels

  Medical-grade 4″ castors glide over any bumps, making the stand easy to pull even on deep carpet. Big wheels reduce vibration of your expensive AV equipment. All wheels are lockable.

• Cable Management

  Hide cables in the lower section of the rear legs.

• Cable Hooks

  Two generous hooks around the back allow cables to be stashed out of sight. Particularly useful to hang power extension cables on when you need to move it.

• Flip-up shelf

  The rear shelf is 460 mm wide - big enough for a laptop and mouse. If it's not needed just fold it up out of the way.

• Media Player Fixing Points

  100 x 100 mm Holes on the VESA mount accommodate a thin Media Player.

• Side By Side

  Some displays can be linked together to form one big display, so the F10 is designed with this in mind. The legs are not wider than the display in portrait mode so multiple displays can be parked next to each other.

• Get Through Doorways

  At only 652 mm deep this stand fits through standard doorways no problem.

• Samsung Flip 55"

  Works for the WM55R 55" model in portrait or landscape mode. The WM65R 65" model is too heavy for this stand.

• Optional Tilt

  If users want to add tilt adjustment the arms from Vision's universal wall mount VFM-W4X4T can be used on the F10 to retrofit tilt.