Introduction

Features

• 4K @ 60 Hz 4:4:4

  18 Gbps bandwidth supports common 4K video formats with ease.

• USB 2.0 Over Network

  Supports USB 2.0 from the transmitter to all receivers, with four USB ports on each receiver — ideal for keyboards, mice, and interactive displays.

• One to One

  Connect a transmitter directly to a receiver with CAT6A for up to 120 m, bypassing the network entirely — or link them over your LAN.

• One to Many

  This product supports multicasting, allowing one transmitter to feed multiple receivers across the network—one per display. Only a single transmitter can operate on the network at a time.

• Wideband IR

  Each transmitter and receiver includes IR pass‑through ports, with an IR blaster and receiver cable supplied. Supports standard 20–60 kHz IR signals bi-directionally.

• RS-232 Pass Through

  Easily control all of the displays with a control system. Baud rate must be defined in browser settings page. 

• Plug and Play

  Just connect the units and they just work. A low‑cost unmanaged switch is all you need—no networking expertise required. All devices simply need to be on the same subnet.

• Audio De-embedder

  The receiver includes a built‑in audio extractor, providing an analogue output you can feed directly into a local sound system.

• Multiple Sources

  If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies.

• Dual-Power

  Requires a power supply for each transmitter and receiver.

• Auto Standby

  When there is no HDMI input at the transmitter all receivers will stop outputting TMDS signal, allowing the displays to go to sleep.

• Web Control Panel

  Advanced setup like image adjustment, DHCP and Static IP settings, and EDID presets. You can also personalise here by uploading flash screen logos.