Digital Signage HDMI-over-IP | Vision Audio Visual

Digital Signage HDMI-over-IP

  • Distributes HDMI via a network
  • H.265 compression
  • One-to-One directly over a LAN or directly
  • One-to-Many over LAN
  • IR Pass-through
  • Share on
  • or
  • HDMI-over-IP Transmitter End of Life
    SAP:
    • Total 1
    • EU 1
  • HDMI-over-IP Receiver End of Life
    SAP:
    • Total 10
    • EU 7
    • UK 3

The TC-HDMIIP/V2 converts HDMI signal into TCP/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.

The previous version of this product was bigger and used H.264 compression, but this new version uses much less bandwidth thanks to the H.265 compression and better quality HiSilicon chipset.

Features

  • Scalable

    Transmitters and receivers sold separately so you can scale your system.

  • HDMI Loop Through

    You may need to connect a display to the computer too, so an HDMI output on the transmitter is included.

  • Advanced EDID Copy

    A reset button restores EDID to default, or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.

  • One to Many

    Need to display one source on many screens? This product multi-casts, so you can have one transmitter for the source, and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.

  • Point to Point without LAN

    Connect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.

  • Maximum Length

    When using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.

  • Resolution

    Fully HDCP 1.4 compliant, it supports resolutions up to 1920 x 1080 @ 60 Hz.

  • Audio

    Digital audio which is encoded on the HDMI signal is transmitted.

  • IR Pass-Through

    Control the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60 kHz IR signals.

  • Plug and Play

    EDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.

  • H.265 Compression

    Video is compressed using the H.265 protocol. Images are full colour with smooth motion.

  • LAN Protocols

    Despite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.

  • Dual-Power

    This product requires a power supply for each transmitter and receiver. It does not use PoE.

  • Unmanaged Switch

    Many video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.

  • Multiple Sources

    If you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.

  • Auto Standby

    If the input is shut off the display will be allowed to go to sleep.

Specifications

  • ORDER PART CODE

    TC-HDMIIP/V2 [SAP: ]

  • Country of Origin

HDMI-over-IP Transmitter

  • CHASSIS DIMENSIONS

    88 x 61.2 x 16.5mm/ 3.46" x 2.41" x 0.65" (length x width x height)

  • PACKAGED DIMENSIONS

    150 x 135 x 70mm/ 5.9" x 5.3" x 2.76"

  • PACKAGED WEIGHT

    1.26 kg / 2.78 lbs (per Tx or Rx)

  • CHASSIS WEIGHT

    0.15 kg / 0.34 lb

  • CONSTRUCTION MATERIAL

    Metal

  • COLOUR

    Black

  • LATENCY

    <120 ms

  • COMPRESSION TYPE

    H.265

  • CHIPSET

    HiSilicon

  • CABLE

    CAT5E/6 Shielded or Unshielded

  • HDMI VERSION

    1.3 (3D not supported)

  • HDCP VERSION

    1.4

  • MAXIMUM CABLE LENGTH

    150m (492 ft)

  • MAXIMUM RESOLUTION

    1920×1200 @60Hz

  • VIDEO BANDWIDTH

    6.75 Gbps

  • COLOUR SPACE AND DEPTH

    RGB, YCbCr 4:4:4, YCbCr 4:2:2
    12-bit

  • HDMI AUDIO FORMATS

    LPCM 2.0CH, 32 kHz, 44.1 kHz, 48 kHz

  • IR FREQUENCY

    20 Hz ~ 60 kHz

  • ESD PROTECTION

    Human body model —±8kV (Air-gap discharge) & ±4kV (Contact discharge)

  • OPERATING TEMPERATURE RANGE

    10℃ - 50 ℃ / 14 °F - 122 °F

  • RELATIVE HUMIDITY

    20~90% RH (non-condensing)

  • POWER CONSUMPTION

    Transmitter: 1.5 Watts
    Receiver: 1.25 Watts

  • TRANSMITTER I/O

    Input: 1 x HDMI (type A)
    Outputs:
    1 x HDMI (type A) though
    1 x RJ45
    1 x 3.5mm Minijack (for IR blaster)

  • POWER SUPPLY

    100-240v 50/60Hz AC 5 volt / 1 amp
    Transformer integrated into plug

  • INCLUDES INTERCHANGEABLE PLUGS

    UK/EU/US/AU

  • DC TAIL LENGTH

    1.5m (5 ft)

  • INTERCHANGEABLE PRONGS

    Yes

  • POWER TRANSFORMER DIMENSIONS

    41.3 x 40.2 x 28.4mm/ 1.63" x 1.58" x 1.12"

  • TRANSMITTER ACCESSORIES

    1 x IR Blaster with 1.5 m (5 ft) Cable
    1 x set of wall mounting ears

  • WARRANTY

    Lifetime return-to-base

  • COMPLIANCES

    RoHS, WEEE, CE/EMC, LVD, IEC, FCC, RCM, IC

  • ORDER PART CODE

    TC-HDMIIPTX/V2 [SAP: 6243779]

  • Country of Origin

    China

  • ISO

    ISO 9001:2015

HDMI-over-IP Receiver

  • CHASSIS DIMENSIONS

    88 x 61.2 x 16.5mm/ 3.46" x 2.41" x 0.65" (length x width x height)

  • PACKAGED DIMENSIONS

    150 x 135 x 70mm/ 5.9" x 5.3" x 2.76"

  • PACKAGED WEIGHT

    1.26 kg / 2.78 lbs (per Tx or Rx)

  • CHASSIS WEIGHT

    0.15 kg / 0.34 lb

  • CONSTRUCTION MATERIAL

    Metal

  • COLOUR

    Black

  • LATENCY

    <120 ms

  • COMPRESSION TYPE

    H.265

  • CHIPSET

    HiSilicon

  • CABLE

    CAT5E/6 Shielded or Unshielded

  • HDMI VERSION

    1.3 (3D not supported)

  • HDCP VERSION

    1.4

  • MAXIMUM CABLE LENGTH

    150m (492 ft)

  • MAXIMUM RESOLUTION

    1920×1200 @60Hz

  • VIDEO BANDWIDTH

    6.75 Gbps

  • COLOUR SPACE AND DEPTH

    RGB, YCbCr 4:4:4, YCbCr 4:2:2
    12-bit

  • HDMI AUDIO FORMATS

    LPCM 2.0CH, 32 kHz, 44.1 kHz, 48 kHz

  • IR FREQUENCY

    20 Hz ~ 60 kHz

  • ESD PROTECTION

    Human body model —±8kV (Air-gap discharge) & ±4kV (Contact discharge)

  • OPERATING TEMPERATURE RANGE

    10℃ - 50 ℃ / 14 °F - 122 °F

  • RELATIVE HUMIDITY

    20~90% RH (non-condensing)

  • POWER CONSUMPTION

    Transmitter: 1.5 Watts
    Receiver: 1.25 Watts

  • RECEIVER I/O

    Input: 1 x RJ45
    Outputs:
    1 x HDMI (type A)
    1 x 3.5mm Minijack (for IR receiver)

  • POWER SUPPLY

    100-240v 50/60Hz AC 5 volt / 1 amp
    Transformer integrated into plug

  • INCLUDES INTERCHANGEABLE PLUGS

    UK/EU/US/AU

  • DC TAIL LENGTH

    1.5m (5 ft)

  • INTERCHANGEABLE PRONGS

    Yes

  • POWER TRANSFORMER DIMENSIONS

    41.3 x 40.2 x 28.4mm/ 1.63" x 1.58" x 1.12"

  • RECEIVER ACCESSORIES

    1x IR Receiver with 1.5 m (5 ft) Cable
    1 x set of wall mounting ears

  • WARRANTY

    Lifetime return-to-base

  • COMPLIANCES

    RoHS, WEEE, CE/EMC, LVD, IEC, FCC, RCM, IC

  • ORDER PART CODE

    TC-HDMIIPRX/V2 [SAP: 6243780]

  • Country of Origin

    China

  • ISO

    ISO 9001:2015

Downloads

Product PDF

TC-HDMIIPRX/V2 (English)

(en)
172.38 KB

TC-HDMIIPTX/V2 (English)

(en)
172.38 KB

Manuals

Manual

(en)
3.22 MB

Certificates

Declaration of Conformity

(en)
233.79 KB

Declaration of Conformity

(en)
233.79 KB

Images

TC-HDMIIPRX/V2 Medium Image Pack

(en)
223.76 KB

TC-HDMIIPRX/V2 Thumbnails Image Pack

(en)
23.23 KB

TC-HDMIIPRX-V2

(en)
1.03 MB

TC-HDMIIPTX/V2 Medium Image Pack

(en)
200.38 KB

TC-HDMIIPTX/V2 Thumbnails Image Pack

(en)
23.39 KB

TC-HDMIIPTX-V2

(en)
840.36 KB

Where to Buy

Australia

Austria

Belgium

Czech Republic

Denmark

Estonia

Finland

Germany

Iceland

Ireland

Italy

Lithuania

Netherlands

New Zealand

Norway

Portugal

South Africa

Spain

Sweden

Switzerland

United States