VFM-FM Motorised Flat Panel Floor Stand

Snapshot

> Lifts flat-panels weighing up to 130kg
> Linak motor provides 500mm (19.7″) height adjustment
> Optional extras: cover, shelf, wheels

 

Details

The Vision Flat-Panel Mount Floor (VFM-F) range has the greatest adjustability of any mount available. It accepts almost any size of display – interactive or not. The H-frame provides incredible strength, flexibility, and stability.

The cover and shelf shown in the images are optional extras.

Lifts 130kg (287 lbs)
The heaviest interactive flat panel is the 84″ Microsoft Surface Hub which weighs almost 130kg. During repetition testing only Linak’s motor was still working after one week. Linak are the gold-standard in linear-drive motors and have worked with Vision to customize a motor just for this mount.

800 x 600 VESA
Fits any displays with mounting points 800 mm (31.5″) wide x 600 mm (23.6″) tall.  The flat panel mount has locking screws which prevent lifting.

1200mm overall height adjustment
As well as the 500mm (20″) of motorised movement, the outer legs fix to the H-frame with 700mm (28″) of range to provide levelling and height adjustment. That means up to 1200mm (47″) of range! At it’s lowest setting it can almost touch the floor. At it’s highest setting the display can be around 2500mm (98″) high.

Wide Stance
The legs are 750mm (30″) wide to create a stable platform. This width reduces wobble and eliminates jacking (shuddering) as the display travels up due to uneven weight distribution.

Control
A simple cable remote control sticks to the side- at the top of the flat panel out of reach.

4 x Wall Anchors
The H-Frame – which is 133mm (5.2″) deep overall – can be fixed directly to the wall or the wall anchors can stand it off from the wall up to 150mm (5.9″) to allows dado rail to pass behind. The wall anchors can be positioned literally at any point behind the H-Frame.

Height Limiter
A safety switch fixes to the top-rear of the display and stops the motor if the moving assembly hits the ceiling. It can also be fixed to the bottom of the display to stop descent.

Cable Management
The wall anchor sub-frame has slots to easily cable-tie power distribution blocks and cables at rear.

Options

Cover
This mount looks great without a cover but for corporate applications the optional cover is essential. Constructed from Aluminium Composite Panel which is strong and scratch resistant, the cover comes in four parts: one section goes above the display and is only visible when the screen is at its lowest point. The other three section fix below the screen.

1200 x 600 VESA
The mount can be swapped out with the larger VFM-W12X6 to accommodate bigger flat panels.

Wheels
Sturdy wheels convert the assembly into a portable solution. The wheels include a cross-brace and measure 750mm x 750mm (29.5″). 70mm (2.8″) locking wheels are used.

Shelf
A shelf is available which can be mounted above or below the flat-panel at various heights. 306mm (12″) deep x 500mm (19.7″) wide.

 

Manual
VFM-FM Manual
VFM-FM dimensions
VFM-FM CAD

VFM-FC Manual
VFM-FC dimensions
VFM-FC CAD

VFM-FW Manual
VFM-FW dimensions
VFM-FW CAD

VFM-FS Manual
VFM-FS dimensions
VFM-FS CAD


Specifications

PRODUCT DIMENSIONS:
See drawings

PACKAGED DIMENSIONS:
VFM-FM: 1400 x 380 x 140 mm/ 55.12″ x 14.96″ x 5.51″
VFM-FC: 800 x 140 x 610 mm/ 31.5″ x 5.51″ x 24.0″
VFM-FW: 835 x 230 x 110 mm/ 32.87″ x 9.06″ x 4.33″
VFM-FS: 860 x 360 x 60 mm/ 33.9″ x 14.2″ x 2.4″

PRODUCT WEIGHT:
VFM-FM: 45 kg (99.2 lbs)
VFM-FC: 11.5 kg (25.4 lbs)
VFM-FW: 12 kg (26.5 lbs)
VFM-FS: 4.5 kg (9.9 lbs)

PACKAGED WEIGHT:
VFM-FM: 53 kg (116.8 lbs)
VFM-FC: 13 kg (28.66 lbs)
VFM-FW: 14 kg (30.9 lbs)
VFM-FS: 6.5 kg (14.3 lbs)

SAFE WORKING LOAD:
110″ flat panel  / 130kg (287 lbs)
Note: when using wheels extreme caution should be used when moving a heavy assembly.
Vision recommends not raising the display over 2000mm (78.7″) high unless it is possible to secure the top of the H-Frame to a load bearing structure.

CONSTRUCTION MATERIAL: Steel

COLOUR: White
VFM-FC (Optional Cover): Dark Grey

VESA SIZES:All sizes up to and including 800 x 600 mm / 31.5″ x 23.6″

TECHNICAL DETAILS:
Motor Type: Linear-drive
Auto Brake: Yes
Pushing Force: 1500N
Travel Distance: 500mm / 19.7″

ACCESSORIES INCLUDED:
1 x EU IEC Power cable 1.8m (6 ft) long
1 x UK IEC Power cable 1.8m (6 ft) long
1 x AU IEC Power cable 1.8m (6 ft)long
1 x US IEC Power cable 1.8m (6 ft)long

POWER SUPPLY: 110-230V Internal Power Supply

WARRANTY: Lifetime return-to-base
2 years onsite (UK only)

COMPLIANCES: RoHS, WEEE, FCCCE/EMC, CE/LVD, RCM/DOC, RCM/POC

ORDER PART CODE:
VFM-FM: [SAP: 4291362]

Optional accessories:
Cover: VFM-FC [SAP: 4291363]
Wheels: VFM-FW [SAP: 4291126]
Shelf: VFM-FS [SAP: 4291125]
Larger VESA bracket: VFM-W12X6 [SAP:3782116]

Other Images: