The Vision Flat-Panel Mount – Desk range is tough and flexible. The VFM-DAD2 (desk arm dual) accommodates two flat-panel LCD or LED screens which have 100 x 100mm rear mounting holes – in other words almost all computer monitors.
SWL 18 kg
The VFM-DAD2 can support monitors up to 18 kg (39.7 lb).
Up to 30″
If a larger displays have the correct mounting points and weighs less than the SWL this mount can support it safely.
To allow for different loads the dampers can be tightened or loosened to make sure the display stays where it is when you let go of it.
Clamp or Fix
The VF-DAD2 can be clamped or a fixing adaptor is included to bolt it to the table (requires drilling hole in table).
Freedom of Movement
Almost endless tilt, rotation, swivel, and height adjustment puts the display right where you need it.
Move each display up and down independently to get the right ergonomic setup.
The centres of the displays can be up to 1130 mm (44.5″) apart. The maximum height from the desk top to the centre of the screens is 390 mm (15.4″).
PRODUCT DIMENSIONS: see image
PACKAGED DIMENSIONS: 422 x 327 x 140 mm / 16.6″ x 12.9″ x 5.5″ (length x width x height)
PRODUCT WEIGHT: 5.8 kg / 12.8 lbs
PACKAGED WEIGHT: 6.4 kg / 14.1 lbs
SAFE WORKING LOAD: 18 kg / 39.7 lbs
CONTRUCTION MATERIAL: Aluminum
100 × 100 mm / 3.9″ x 3.9″
8 x M4 12mm screw
8 x M5 12mm screw
3 x M6 12mm screw
2 x M6 10mm screw
WARRANTY: Lifetime return-to-base
2 years onsite (UK only)