TM-IFP Flat Panel Floor Stand

Snapshot

TM-IFP fixed front angle with fp> Heavy duty floor mount for interactive flat-panels
> Motorised 500mm (19.7″) up/down travel
> Fix to floor or add optional wheels

 

 

TM-IFP portable rear angle with fp showing cables alt

Details

Robust and simple, the Techmount for flat-panels fits any flat-panel LCD or LED screen which uses VESA mounting points up to 600mm (23.6″) wide x 400mm (15.7″) tall apart. In standard guise it fixes to the floor but an optional portable conversion kit is available.

SWL 115kgTM-IFP portable front angle
Interactive and non-interactive flat-panels both use the same VESA mounting point system, but interactive flat panels are much heavier. The linear-drive motor can lift up to 115kg (253.5 lbs) and is smooth and quiet.

Cable Retraction
The TM-IFP features a dynamic cable management system which uses retracting reels to help avoid the power and input cables dropping into sight when the flat-panel is lowered.

Remote Control
A simple cable remote control fits to the rear of the flat panel out of reach from little fingers.

Wall Anchors
A stand-off bracket fixes the column to the wall and allows dado rail to pass behind the assembly.

Shared Power
An integrated power output means the flat-panel and mount can share a single power cable.

Rear Cubby
Accommodation for cable-tying power distribution block or media player at rear.

Hang and lockTM-IFP fixed rear angle
With the VESA plates attached to the flat-panel the screen assembly simply lowers on to the upper column and bolts lock it in place.

Cable Management
An aluminium cable trunking strip on the lower part of the column hides cables.

Optional Wheels
If the flat-panel is a shared resource Vision offer a dolly which converts the assembly into a portable solution. The weighted base is 950mm (37.4″) wide by 660mm (26″) deep and uses big 100mm (4″) wheels to maximise stability.

Optional Shelf
A shelf is available which can be mounted in front, behind, above, or below the flat-panel.

Levelling Floorplate
An adjustable floor plate allows for floors which are not flat or level.

Height Limiter
The maximum travel height can be adjusted for rooms with lower ceilings.

TM-IFP Manual 
Quick Manual
TM-IFP CAD

TM-IFP fixed rear angle with fp
Specifications

PRODUCT DIMENSIONS:
Without wheels: 1680 x  635 x 210 mm / 66.1″ x 25″ x 8.3″ (height x width x depth in lowest position)
With wheels: 1850 x 949 x 740 mm  / 72.8″ x 37.4″ x 29″ (height x width x depth in lowest position)

PACKAGED DIMENSIONS:
TM-IFP: 770 x 560 x 180 mm / 47.3″ x 22″ x 7.1″
TM-IFP WHEELS: 960 x 780 x 80 mm / 37.8″ x 30.7″ x 3.1″
TM-IFP SHELF: 990 x 320 x 60 mm / 39″ x 12.6″ x 2.4″

PRODUCT WEIGHT:
TM-IFP: 43 kg (94.8 lbs)
TM-IFP WHEELS: 13 kg (28.7 lbs)
TM-IFP SHELF: 7.9 kg ( 17.4 lbs)

PACKAGED WEIGHT:
TM-IFP: 46 kg (101.4 lbs)TM-IFP fixed side with fp
TM-IFP WHEELS: 15 kg (33 lbs)

SAFE WORKING LOAD:
Fixed to floor: 90″ flat panel  / 115kg (253.5 lbs)
Portable (with wheels): 75″ flat panel  / 90kg (198.4 lbs)

CONSTRUCTION MATERIAL: Aluminium and Steel

COLOUR: Black and Aluminium

VESA SIZES:
800 x 600 mm / 31.5″ x 23.6″
800 x 400 mm / 31.5″ x 15.7″
600 × 600 mm / 23.6″ x 23.6″
600 × 400 mm / 23.6″ x 15.7″
500 x 500 mm / 19.7″ x 19.7″
400 × 400 mm / 15.7″ x 15.7″ (for 55” Microsoft Surface Hub)
400 x 300 mm / 15.7″ x 11.8″
400 × 200 mm / 15.7″ x 7.9″
300 × 300 mm / 11.8″ x 11.8″
200 × 400 mm / 7.9″ x 15.7″
200 × 200 mm / 7.9″ x 7.9″
100 × 100 mm / 4″ x 4″
75 x 75 mm / 3″ x 3″

TECHNICAL DETAILS:
Motor Type: Linear-drive
Rated Cycles: 12000
Speed: 15mm/sTM-IFP fixed front angle
Pushing Force: 2000N
Pulling Force: 1800N
Travel Distance: 500mm / 19.7″

ACCESSORIES INCLUDED:
1 x IEC C13 Power cable male to female 1.0m (3 ft) long
1 x EU IEC Power cable 1.8m (6 ft) long
1 x UK IEC Power cable 1.8m (6 ft) long
1 x AU IEC Power cable 1.8m (6 ft)long
2 x Wall bracket

POWER SUPPLY: 240V 4.1A Internal Power Supply

WARRANTY: Lifetime return-to-base
2 years onsite (UK only)

COMPLIANCES: RoHS, WEEE, FCCCE/EMC, CE/LVD, RCM/DOC, RCM/POC

ORDER PART CODE:
TM-IFP2 [SAP: 3278717]
TM-IFP+WHEELS [SAP: 3483690]

 

Optional accessories:
TM-IFP WHEELS [SAP:3054655]
TM-IFP SHELF [SAP: 3239284]
TM-IFP EARS [SAP:3277795] 800×400 / 600×400 / 400×400 / 400×300 / 400×200 / 200×200 / 100×100 not included: 800×600 / 200×400
TM-IFP EARS2 [SAP:3557028] For Clevertouch 84” which requires 600 x 600. 800×400 / 600×600 / 600×400 / 400×400 / 400×300 / 400×200 / 200×200 / 100×100 not included: 800×600 / 200×400

TM-IFP HUB ears angle

Images with portable stand:

TM-IFP portable front angle with fpTM-IFP portable side with fp TM-IFP portable rear TM-IFP portable rear with fp TM-IFP portable rear angle TM-IFP portable rear angle with fp