One-Minute Product Profile
Available in eight different size combinations
Click here to download the calculator which tell you what parts are required to fit your projector:
a) Select a small or medium top plate package which includes the top and bottom plates, foam blocks, locking collars, and locks.
The small plate accommodates projectors up to 315 x 235mm / 12.4″ x 9.25″
The medium plate accommodates projectors up to 375 x 300mm / 14.76″ x 11.81″
b) Select a side package which includes eight side panels and comes in four sizes to allow for projectors of different heights; 80, 100, 120, and 160mm (3.15″, 4.0″, 4.72″ and 6.3″).
The two locks do not use the same key, creating delay for a thief as they struggle to figure out which key is for which lock. The same two keys are provided with every TM-CAGE so that a facility manager with a number of cages only needs to have two keys with him at any time.
Cooling, Cable, & IR Access
Sliding side panels allow unimpeded connectivity, open airflow, and IR remote control access.
The TM-CAGE is obvious enough to serve as an effective visual deterrent, but is unobtrusive. Just because it needs to be seen, doesn’t mean it needs to be ugly! Weighing only 3.5kg (7.72 lbs), the enclosure assembles like a puzzle making it deceptively difficult to take apart.
1/ Set bottom plate on non-scratch surface
2/ Put projector into place
3/ Add side panels on long sides
4/ Fit top plate
5/ Add side panels on short sides
6/ Attach Techmount Projector bracket
7/ Fit collars
8/ Fit locks
Security comes from intelligent design, rather than over-engineering.
The modular design allows compact packaging, reducing freight and warehousing costs.
Fits All Brackets
Fits all Vision projector Techmounts including the TM-ST wall boom.
The cage conforms as closely as possible to the size of the projector, which allows a more secure design and makes it more attractive. Security is enhanced because the projector can’t be manoeuvred within the enclosure to squeeze it out of an aperture, and also an attempt to cut the cage would almost certainly damage the projector.
Unrestricted pitch and roll adjustment. When using with the TM-1200 a further 5° tilt is possible.
The projector sits upside-down inside the cage on high density foam blocks which provide damping from vibration and protect the chassis of the projector.
PLATE PACKAGE SIZES
Small: Accommodates projectors up to 315 x 235mm / 12.4″ x 9.25″
Medium Accommodates projectors up to 375 x 300mm /14.76″ x 11.81″
Small Plate Package 286 x 287 x 84mm / 11.26″ x 11.3 x 3.31″
Medium Plate Package 326 x 222 x 77mm / 12.83″ x 8.74″ x 3.03″
80mm Side Package 98 x 87 x 66mm / 3.86″ x 3.43″ x 2.6″
100mm Side Package 118 x 87 x 66mm / 4.65″ x 3.43″ x 2.6″
120mm Side Package 138 x 87 x 66mm / 5.43″ x 3.43″ x 2.6″
160mm Side Package 178 x 87 x 66mm / 7.0″ x 3.43″ x 2.6″
Small Plate Package 3.8 kg / 8.38 lbs
Medium Plate Package 4.8 kg / 10.58 lbs
80mm Side Package 1.0 kg / 2.2 lbs
100mm Side Package 1.1 kg / 2.43 lbs
120mm Side Package 1.2 kg / 2.65 lbs
160mm Side Package 1.4 kg / 3.1 lbs
SAFE WORKING LOAD 7kg / 15.43 lbs
COLOUR Satin White
16 x High density packing foam blocks
1 x Lock Hex Key
2 x Disc Locks with one key each
BATTERIES (SUPPLIED): 6 x LR44 (aka AG13) Batteries per lock
WARRANTY: 3-year return to base
COMPLIANCES: TUV-GS Certification
INDIVIDUAL PART CODES: