TC3 VGATP VGA-over-CAT6 Module

Snapshot

TC3_VGATP_Tx_front_angle> Carries VGA signal over CAT (twisted pair) cable up to 80m (262 ft)
> Audio loops through transmitter (not carried over CAT cable)
> Single power adaptor, can be used at either end


TC3_VGATP_Rx_output

Details

TC2 VGATP receiver inputsVision’s “Techconnect Twist” products allow a variety of signals to be transmitted long distances over standard unshielded CAT5e and CAT6 cable. Including an active transmitter and receiver the ‘VGATP’ uses inexpensive flexible network cable to route ‘VGA’ signal from a computer to a distant display.

TC3_VGATP_Rx_front_angleTechconnect Module
The transmitter presents as a normal Vision Techconnect VGA and minijack module from the front, allowing seamless installation in the Techconnect faceplate.

Up to 80m
VGA signal is weak which limits cable length. The VGATP overcomes this and can send 1024 x 768 resolution signal through standard unshielded CAT6 cable up to 80m (262 ft) long. Using CAT5e cable extended the maximum length to 60m (197 ft).

PoE
Proprietary power-over-ethernet technology means only one mains power adaptor is required to power both the transmitter and receiver. The included international power adaptor can use used at either end.

TC3_VGATP_Tx_rear_angleFaster Installation
Installers can take advantage in buildings which have been flood-wired with network cable. Where a CAT5 cable is already in place the installation is super-fast.

Future-Proof
Replacing VGA cable with a twisted pair cable means if in the future you need to replace the VGA with HDMI or DisplayPort you can just change the adaptors at the ends.

EQ
An equalisation adjustment pot on the receiver allows for varying cable length.

TC3_VGATP_Tx_dimsEasier to work with
Compared to VGA cable CAT6 is much less expensive and is easier to work with; it has a tighter bend-radius, is thinner, easier to pull, and simple to terminate.

Note: This product does not support the SCL and SDA lines which carry ‘Display Data Channel’ (DDC) or the related ‘Extended Display Identification Data’ (EDID) data.

Manual

Specifications

TRANSMITTER DIMENSIONS: 71 x 21 x 43 mm / 2.8″ x 0.83″ x 1.69″ (length x width x height)

RECEIVER DIMENSIONS: 74 x 33 x 21 mm / 2.91″ x 1.3″ x 0.83″ (length x width x height)

PACKAGED DIMENSIONS: 185 x 120 x 55 mm / 7.28″ x 4.72″ x 2.17″

TC3_VGATP_Rx_dimsPRODUCT WEIGHT: 0.2 kg / 0.44 lb per set

PACKAGED WEIGHT: 0.3 kg / 0.66 lb per set

RECOMMENDED MAXIMUM CABLE LENGTH:
CAT5e: 1024 x 768: 60m / 1280 x 1024: 50m / 1600 x 1200: 40m
CAT6: 1024 x 768: 80m / 1280 x 1024: 70m / 1600 x 1200: 60m

CONSTRUCTION MATERIAL: Plastic

COLOUR: White

TC2 P12V0.5A Power Supply UnitPOWER SUPPLY: 100-240v AC 50/60Hz 12 volt / 0.5 amp
Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length: 4m. Transformer dimensions: 66 x 43 x 30mm / 2.6″ x 1.69″ x 1.18″

ACCESSORIES INCLUDED:

WARRANTY: Lifetime return-to-base
2 years onsite (UK only)

COMPLIANCES: RoHS, WEEE, EMC/CE, and FCC compliant

ORDER PART CODE: TC3 VGATP [SAP:3446587]

SPARE POWER SUPPLY UNIT (PSU):
TC2 P12V0.5A [SAP:2940992]

TC3_VGATP_set