The transmitter from this set simply fits into the Techconnect faceplate on the wall.
The ‘HDMITP’ makes use of inexpensive and flexible UTP (unshielded twisted pair) cable to route HDMI signal from a computer to a distant display.
Installers can take advantage in buildings which have been flood-wired with network cable. Where a CAT6 cable is already in place the installation is super-fast.
The transmitter presents as an ordinary Techconnect HDMI module from the front, allowing seamless installation. The circuit on rear of the module is packed with technology.
With a 1920 x 1080 resolution signal the CAT5e cable can be up to 30m (98.4 ft) long. CAT6 cable takes this maximum recommended length up to 50m (164 ft). With common 1280 x 800 resolution the cables can be longer because of the reduced bandwidth required: 50m (164 ft) on CAT5e cable, and 60m (196.9 ft) on CAT6 cable.
Two power supplies are included – one for the transmitter, and one for the receiver. The complex HDMI signal uses all four pairs of wires inside the CAT cables so it is not possible to also carry power over the cable.
Version 1.2 of HDCP (High-bandwidth Digital Content Protection) is supported. HDCP authentication is the technology developed by Intel that prevents copying of digital content as it passes through cables.
Full EDID handshake is supported, which allows the source device to output the native display resolution. A reset button on the transmitter can be pressed to capture information from the display if the display is changed.
Easier to work with
Compared to long HDMI cables ethernet cable is easier to work with; it has a tighter bend-radius, is thinner, easier to pull, and simple to terminate.
RECEIVER DIMENSIONS: 82 x 44 x 24 mm / 3.2″ x 1.7″ x 0.9″ (length x width x height)
PACKAGED DIMENSIONS: 165 x 145 x 95 mm / 6.5″ x 5.7″ x 3.7″
PRODUCT WEIGHT: 123g / 0.27 lb per set
PACKAGED WEIGHT: 0.7 kg / 1.54 lb per set
RECOMMENDED MAXIMUM CABLE LENGTH:
CAT5e: 1280 x 1024: 50m / 1600 x 1200: 40m / 1920 x 1080: 30m
CAT6/7: 1280 x 1024: 60m / 1600 x 1200: 55m / 1920 x 1080: 50m
CONSTRUCTION MATERIAL: Plastic/ Metal
Video Amplifier Bandwidth: 6.75Gbps (2.25Gbps/TDMS Channel)
Input Video Signal: 0.5-1.5 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Maximum Video Format Supported: 1920×1200 / 1080P
Output Video: HDMI 1.3, 3D @ 60Hz
Operating Temperature Range: -15 to +55°C
Operating Humidity Range: 5 to 90 % RH (no condensation)
Maximum operation current: 800mA
POWER SUPPLY: 100-240v 50/60Hz AC 5 volt / 2 amp
Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length: 4m / 13.1 ft. Transformer dimensions: 66 x 43 x 32mm / 2.6″ x 1.7″ x 1.3″
WARRANTY: Lifetime return-to-base
2 years onsite (UK only)
ORDER PART CODE: TC3 HDMITP [SAP:3446574]
SPARE POWER SUPPLY UNIT (PSU):
TC2 P5V2A [SAP:2940996]