One-Minute Product Profile
The Techconnect HDMI repeater joins two HDMI cables to make a single long cable. The small chassis can hide in dado rail, and it suits any application where HDMI cables are used including corporate meeting rooms, home cinemas, classrooms, and churches.
Two cables can be joined together to create one 30m cable capable of 1080P. At lower resolution longer lengths of up to 50m are possible but this depends on cable quality. Note: daisy-chaining more than one repeater is not recommended.
If the two cables are varying lengths the longer one should be used between the source device and the repeater.
Auto-adjustment of feedback, equalization and amplification. The installer does not need to pay attention to cable lengths.
The HDMI repeater has an electrostatic discharge filter to protect itself and expensive source and display equipment.
PRODUCT DIMENSIONS: 51 x 32 x 19 mm / 2″ x 1.26″ x 0.75″ (length x width x height)
PACKAGED DIMENSIONS: 65 x 40 x 20 mm / 2.56″ x 1.57″ x 0.8″
PRODUCT WEIGHT: 0.1 kg / 0.22 lb
PACKAGED WEIGHT: 0.1 kg / 0.22 lb
CONSTRUCTION MATERIAL: Metal
Bandwidth: 1.65 GBPS
Maximum Resolution: 1920 x 1200
Video Format Supported: DTV/HDTV;1080P/1080i/720P/576P/480P/576i/480i
Output Video: HDMI 1.4+HDCP (repeats the source)
Output Audio: Support DTS-HD, Dolby-HD (repeats the source)
Maximum Transmission Distance @ 1080P: 24AWG 50m / 28AWG 36m / 30AWG 30m
EQ: up to 40dB @ 825MHz
Operating Temperature Range: -5 to +35°C (-41 to +95 °F)
Operating Humidity Range: 5 to 90 % RH (no condensation)
Input Video Signal: 0.5-1.0 volts p-p
Power Consumption: 0.6 watts (via HDMI)
Input DDC Signal: 5 volts p-p (TTL)
1 x HDMI (type A)
1 x HDMI (type A)
WARRANTY: 3-year return to base
ORDER PART CODE: TC2 HDMIRPT [SAP: 2643397]