SP-1100P Pair 20w Active Loudspeakers

Snapshot

SP-1100P front angle low> Integrated 20 watt (RMS) digital amplifier
> Two inputs
> Easy-access volume dial on front

One-Minute Product Profile

[one_half]


[/one_half]
[one_half_last]
[/one_half_last]

Details

Designed for use in small meeting rooms and classrooms, the SP-1100P are Vision’s most cost-effective audio solution and represent fantastic value. Great sound quality and Vision’s trademark ease of installation are key features of this product.

Digital
The SP-1100P is assembled by a fully automated production line to ensure reliability, and uses a quality Yamaha class-D digital amplifier chip.

Volume on Front
The volume dial is on the front of the ‘master’ loudspeaker – the one containing the amplifier – so users can easily access it. Turning the volume dial fully anti-clockwise turns the power off (standby).

Easy to Install
Simple “C” brackets are included for swift installation.

SP-1100P front angle with bracketFlexible Connectivity
The rear panel of the master loudspeaker offers minijack and 2-phono inputs.

MDF Fabrication
A sturdy MDF chassis provides a rigid acoustic chamber for distortion free sound, and the tuned bass reflex port enhances bass.

Summed Inputs
The two line-level inputs are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source and display devices in the system are powered from the same mains power source.

Silk Tweeter
A proven two-way design with good quality driver components ensures users will get reliable service for many years.

 

Manual

SpecificationsSP-1100P rear angle with bracket

PRODUCT DIMENSIONS: 150 x 145 x 220 mm / 5.9″ x 5.71″ x 8.66″ (length x width x height for each speaker)

PACKAGED DIMENSIONS: 368 x 318 x 193 mm / 14.5″ x 12.52″ x 7.6″

PRODUCT WEIGHT: 3.4 kg / 7.5 lb (per pair)

PACKAGED WEIGHT: 5.0 kg /11.02 lb (per pair)

CONSTRUCTION MATERIAL: MDF

COLOUR: White

TECHNICAL DETAILS:
Amplifier Output: 2 x 10w watts (RMS)
Woofer: 4″
Tweeter: 1.5″ Silk
Input 1: Minijack (3.5mm / 0.14″ )
Input 2: 2-Phono (RCA)
Speaker Output: Spring-loaded bare-wire type
Speaker Input (on slave): Spring-loaded bare-wire type
Output Impedance: 4 ohms
Sensitivity: 85dB (1w/1m)
Frequency response: 80Hz-16kHz

ACCESSORIES INCLUDED:
2 x Wall brackets
1 x Euro Figure-8 Power cable 1.8m long
1 x UK Figure-8 Power cable 1.8m long
1 x AU Figure-8 Power cable 1.8m long
1 x 5m Speaker Cable

POWER SUPPLY: 240V Internal Power Supply

WARRANTY 2-year return to base

COMPLIANCE: RoHS, WEEE, CE/EMC, CE/LVD, FCC, SAA

ORDER PART CODE: SP-1100P [SAP: 2648571]

SP-1100P frontSP-1100P front angle SP-1100P front angle high