> 2 x 30w RMS (at 8 ohms) low impedance digital power amplifier
> 4 x Stereo inputs / 1 x Stereo Pre-Output / 1 x Balanced Mic input with Phantom Power
> IR remote included with ability to control via RS-232
The Techaudio AV-1700 is compact, flexible, easy to use and is extremely efficient. Use as a standalone mixer and amp, or as a mixer which outputs to a bigger amp or powered loudspeakers.
4 x Stereo Inputs
4 stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 3 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 4 is via a 3.5mm minijack connector, and is duplicated on the front and rear panels for easy access.
A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the AV-1700 affects the output level.
It uses a professional XLR connector and the input is balanced to eliminate electro-magnetic noise induced on long cables. The microphone input has “Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones.
The IR remote control gives the user bass and treble adjustment and direct input selection. The AV-1700 can be controlled by a control device such as Techconnect Control via IR or RS-232.
The clear simple interface offers the user just two dials.
If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again.
Optional mounting hardware is available which allows attachment to a wall, projector ceiling pole, or rack.
AMPLIFIER DIMENSIONS: 220 x 154 x 44mm / 8.7″ x 6.06″ x 1.73″ (wide x deep x tall) not including dials and connectors
CARTON DIMENSIONS: 293 x 233 x 133mm / 11.54″ x 9.17″ x 5.24″
AMPLIFIER WEIGHT: 1.2kg / 2.65 lbs
PACKAGED WEIGHT: 2.0kg / 4.41 lbs
4 x Stereo inputs (via 3 x phono connectors / 1 x 3.5mm minijack)
1 x Microphone inputs via balanced XLR
1 x Stereo Line-level output via phono connectors
2 x 30w @ 8 ohms
Total Harmonic Distortion <2%
Frequency response (line in): 50Hz~18kHz
Signal to noise ratio (line in): 75dB
Rating input level/Impedance:
line in 440~500mV/47kohms
Operating temperature range: 0 to +40°C (32 to +104 °F)
Power consumption (rating condition): <=125W
1 x 2-phono to 2-phono cable 2m long
1 x 3.5mm to 3.5mm minijack cable 2m long
2 x Unshielded Speaker Cable 5m long
1 x UK C7 figure-8 power cable 1.8 m long
1 x EU C7 figure-8 power cable 1.8 m long
1 x AU C7 figure-8 power cable 1.8 m long
1 x US C7 figure-8 power cable 1.8 m long
1 x Remote Control (Battery included: CR2025 3V Li-Mn)
POWER SUPPLY: 100~240V Internal Power Supply
WARRANTY: Lifetime return-to-base
2 years onsite (UK only)
ORDER PART CODE: AV-1700 [SAP: 2940993]
Bundled with SP-1600 loudspeakers: AV-1700+SP-1600 [SAP: 2941704]
Bundled with CS-1600 loudspeakers: AV-1700+CS-1600 [SAP: 2941703]
Bundled with CS-1800 loudspeakers: AV-1700+CS-1800 [SAP:3802219]
Bundled with SP-1800B loudspeakers: AV-1700+SP-1800B [SAP:4001960]
OPTIONAL MOUNTING KIT: AV-1700BRKT [SAP: 2941705]
SPARE IR REMOTE CONTROL: TC2 RC [SAP: 2940997]