Introduction

Features

• UL1678 Approved

  To get this certification the display is installed, the wheels are locked, then the floor is tipped 10° in every direction; the stand mustn't tip over. This limits to SWL of this floorstand to 45 kg (99 lb).

• 350x350 Halo

  The Halo perfectly matches the round "bump" on the back of the Hub2.

• Portrait or Landscape

  The Hub2 can be fixed to the stand in either portrait or landscape.

• Sitting Down?

  For users who are sitting down they can lean the Hub forward to vertical to reduce glare and make sure the conference camera is pointed at them. For users who are standing the display sits at a 7° angle.

• 4" Wheels

  Medical-grade 4″ (100 mm) castors glide over any bumps, making the stand easy to pull even on deep carpet. Big wheels reduce vibration of your expensive AV equipment. All wheels are lockable.

• Cable Management

  Hide cables in the lower section of the rear legs. The excellent cable management reduces the chance of the wheels rolling over the cables when you adjust the floor stand.

• Cable Hooks

  Two generous hooks around the back allow cables to be stashed out of sight. Particularly useful to hang power extension cables on when you need to move it.

• Flip-up shelf

  The rear shelf is 460 mm (18.1") wide - big enough for a laptop and mouse. If it's not needed just fold it up out of the way, or take it off.

• Side By Side

  The legs are not wider than the display in portrait mode so multiple displays can be parked next to each other.

• Get Through Doorways

  At only 652 mm (25.7") deep this stand fits through standard doorways no problem.

• APC Battery Bracket

  The bracket attaches the Microsoft APC battery for Hub2S underneath the shelf, out of the way. Note: with part code VFM-F10/HBKIT this needs to be ordered separately. From July 2021 it will be included with the new part code VFM-F10/HB.