***END OF LINE, LIMITED STOCK LEFT. REPLACED BY TECHCONNECT MATRIX***
> Transmits HDMI over a network
> Signal can flow through up to three network switches
> No cable length limit
One-Minute Product Profile
Part of Vision’s “Techconnect Twist” product family, the TC2-HDMIIP converts HDMI signal into TCP/IP packets for transmission over a 100/10 megabit ethernet network. With no visible loss of video or audio quality it is perfect for corporate and digital signage applications.
Multiple receivers on the network will all display the content from one transmitter. Or if you need to install multiple discreet sets this can be done by setting up virtual LANs on the network switch.
Fully HDCP complaint, it supports a wide range of resolutions up to 1080P plus full digital audio. Note: 3D not supported.
Plug and Play
EDID (extended display identification data) is automatically passed through. Connect equipment and it just works.
The signal passes through a network without the normal skew and balancing distortion.
Video is compressed using the JPEG protocol, but at 30 frames per second there is no visible degradation or delay. Images are full colour with smooth motion.
Despite using the standard IP protocols you don’t need to be a network engineer. If you connect the transmitter directly to the receiver you don’t need to use a network crossover cable.
This product requires a power supply at each end.
TRANSMITTER DIMENSIONS: 110 x 58 x 26 mm / 4.33″ x 2.28″ x 1.02″ (length x width x height)
RECEIVER DIMENSIONS: as above
PACKAGED DIMENSIONS: 150 x 175 x 70 mm / 5.91″ x 6.89″ x 2.76″
PRODUCT WEIGHT: 0.48 kg / 1.06 lb per set
PACKAGED WEIGHT: 0.7 kg / 1.54 lb per set
CONSTRUCTION MATERIAL: Metal
Frame rate: 30fps
HDMI format supported: 1080p @ 50/60Hz
HDMI Version: partial 1.4 e.g. 3D not supported
Maximum cable length: Standard Ethernet rules apply
CAT5: 80m between ethernet devices
CAT5e: 100m between ethernet devices
CAT6: 120m between ethernet devices
Maximum resolution: 1080p@50/60Hz
Operating temperature range: -5℃ ~35 ℃
Operating humidity range: 20%~90%
Power Consumption: 3 Watts (max) each
1 x HDMI (type A)
1 x HDMI (type A)
2 x POWER SUPPLY: 100-240v 50/60Hz AC 5 volt / 2 amp
Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length: 1.8m. Transformer dimensions: 66 x 43 x 32mm / 2.6″ x 1.7″ x 1.26″
2 x Mounting ears
WARRANTY: 3-year return to base
ORDER PART CODE:
Set: TC2-HDMIIP [SAP: 2643392]
Tx: TC2-HDMIIPTX [SAP: 3270369]
Rx: TC2-HDMIIPRX [SAP: 3270370]
SPARE POWER SUPPLY UNIT (PSU):
TC2 P5V2A [SAP:2940994]