Serial Cables & Adaptors

Serial Cable

TC XXMSERIALControl systems for audio-visual and industrial applications use RS-232 which is a 2-way standard which allows the control system to send commands and receive feedback. RS-232 (and RS-485) uses serial cable which has 9-pin d-sub connectors which look like a VGA connector but instead of three rows of pins they only have two.

  • 9-pin D-sub (female) to 9-pin D-sub (female)
  • Colour: White
  • Nickel-plated connectors
  • Sheath: PVC, outer diameter: 5 mm  (0.20″)
  • Conductor thickness: 28 AWG
  • Pins wired straight through (i.e. 1 to 1, 2 to 1, etc)
  • Drain wire laid between aluminum mylar and braid
  • Al-Mg alloy wire overall
  • Shield: > 65% coverage braided shield
  • Impedance: at 10 MHz, 75Ω (coaxial cable)
  • Resistance 20℃(Ω/1000 m) 237.25
  • Packaged Weight:
    • 2 m: 0.09 kg (0.2 lb)
    • 5 m: 0.23 kg (0.51 lb)
    • 10 m: 0.45 kg (0.99 lb)
    • 15 m: 0.68 kg (1.5 lb)
  • Packaged Dimension:
    • 2 m: 220 mm x 320 mm (8.7″ x 12.6″)
    • 5 m: 220 mm x 320 mm (8.7″ x 12.6″)
    • 10 m: 220 mm x 320 mm (8.7″ x 12.6″)
    • 15 m: 260 mm x 340 mm (10.2″ x 13.4″)
  • Conformity: CE, FCC, Retail packaging

Part Numbers

TC 2MS [SAP:3265213] 2 metres (6.6 feet)
TC 5MS [SAP:3265214] 5 metres (16.4 feet)
TC 10MS [SAP:3265216] 10 metres (32.8 feet)
TC 15MS [SAP:3265217] 15 metres (49.2 feet)

 DB9 (SERIAL)

 

Serial Extension Cable

  • TC XXMSEXT9-pin D-sub (male) to 9-pin D-sub (female)
  • Colour: White
  • Nickel-plated connectors
  • Sheath: PVC, outer diameter: 5 mm (0.20″)
  • Conductor thickness: 28 AWG
  • Pins wired straight through (i.e. 1 to 1, 2 to 1, etc)
  • Drain wire laid between aluminum mylar and braid
  • Al-Mg alloy wire overall
  • Shield: > 65% coverage braided shield
  • Impedance: at 10MHz, 75Ω (coaxial cable)
  • Resistance 20℃(Ω/1000 m) 237.25
  • Packaged Weight:
    • 2 m: 0.09 kg (0.2 lb)
  • Packaged Dimension:
    • 2 m: 220 mm x 320 mm (8.7″ x 12.6″)
  • Conformity: CE, FCC, Retail packaging

Part Numbers

TC 2MSEXT [SAP:3265212] 2 metres (6.6 feet)

 

USB to Serial Adaptor

TC-USBSERConverts a USB port on a computer into a 9-pin serial port for RS-232 control applications.

  • USB-B (male) to 9-pin D-sub (male)
  • Includes female to female gender change adaptor
  • Colour: Black
  • Works with Mac and PC
  • Powered by USB
  • Nickel-plated connectors
  • Installed as standard COM port
  • Supports over 480 Mbps data transfer rate and 1.8V, 2.5V, 3.3V, 5.0V
  • Supports all RS-232 data signals; TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
  • FTDI chipset
  • Packaged Weight:
    • 0.06 kg ( 0.13 lb)
  • Packaged Dimension:
    • 170 mm x 220 mm (6.7″ x 8.7″)
  • Cable Length:
    • 85 mm (3.35″)
  • Retail packaging
  • Part Number: TC-USBSER [SAP:3265219]
  • Drivers

TC-USBSER