>Built-in 2 x 15 watt (RMS) amplifier
> Line-level inputs or speaker-level inputs
> Wall brackets and flat-panel brackets included
Vision’s SB-800P Soundbar is a simple way to add quality audio to professional flat-panel screens which do not have speakers integrated. The attractive chassis enhances any audio-visual installation in meeting rooms, boardrooms, and conference rooms.
If users need to be able to move their interactive flat panel screen between rooms Vision’s soundbar is the perfect choice. The soundbar can be hung under the flat panel, attaching to the flat panel floor mount at the same points the flat panel uses.
Two 3.5″ woofers are complemented by two tweeters. A crossover circuit splits the frequency spectrum across four drivers to maximise efficiency.
If the flat-panel is wall mounted then a wall bracket is included which fixes the soundbar close to the wall.
A set of 700 mm (27.6″) brackets is also included which hang the soundbar under the flat panel.
As well as being able to connect any line-level device to the SB-800P – like your phone – you can also opt to bypass the internal amplifier and use the soundbar as passive speakers. Some flat panels have an amplifier inside, so this approach allows you to use the flat-panel remote to adjust volume.
Two Summed Line-level Inputs
The input panel offers minijack and 2-phono (RCA) line-level inputs which are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source and display devices in the system are powered from the same mains power source, otherwise earth hums will occur.
PACKAGED DIMENSIONS: 870 x 92 x 135 mm / 34″ x 3.6 ″ x 5.3″
PRODUCT WEIGHT: 2 kg / 4.4 lb
PACKAGED WEIGHT: 2.7 kg /5.9 lb
CONSTRUCTION MATERIAL: ABS Plastic
Amplifier Output: 2 x 15w watts (RMS)
Woofer: 2 x 3.5″
Tweeter: 2 x 0.5″
Input 1: Minijack (3.5mm)
Input 2: 2-Phono (RCA) (inputs are summed)
Speaker Input (from flat panel if it has internal amplifier): Removable Phoenix type
Output Impedance: 8 ohms
Sensitivity: 88dB (1w/1m)
Frequency response: 120Hz-20kHz
1 x Wall bracket
2 x 700mm mounting strips – to hang soundbar beneath flat panel.
Note: no input cables are included
POWER SUPPLY: 100-240v 50/60Hz AC External Power Supply – 18 volt / 1 amp
Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length: 4m.
Transformer dimensions: 75 x 38 x 50mm / 3″ x 1.5″ x 2″ (tall x wide x deep) including prongs
WARRANTY: Lifetime return-to-base
2 years onsite (UK only)
COMPLIANCE: RoHS, WEEE, CE/EMC, FCC, RCM-POC, RCM-SDOC
ORDER PART CODE: SB-800P [SAP: 3872395]
SPARE POWER SUPPLY UNIT (PSU): TC2 P18V1A [SAP: 3675051]