**END OF LINE**
> Integrated 2 x 30 watt (RMS) digital amplifier
> 1 x wired input / 1 x Bluetooth input / 1 x line-level output
> IR remote included
The CS-1600P are based on Vision’s passive ceiling loudspeakers but have a powerful 60 watt amplifier built in to eliminate the need for an external amplifier. They are suited to meeting rooms and classrooms where a discrete audio solution is required.
Connect directly from your phone or laptop wirelessly. When Bluetooth is activated either by turning them on or selecting “Bluetooth” on the remote control, the loudspeakers will search for Bluetooth devices for ten minutes and automatically switch from the cabled input when a device connects. When the bluetooth device is disconnected the loudspeakers automatically switch back to the line-level input. (NB: implementation of Bluetooth drivers on Windows computers is variable so they don’t always work)
A full range of options are presented on the IR remote control, including bass and treble adjustment.
Like Vision’s other powered loudspeakers these are packaged and sold as a pair. The amplifier is housed in the “master” loudspeaker which has the connection panel, and there is a speaker output which connects to the passive “slave” loudspeaker.
The CS-1600P uses a class-D digital amplifier chip which uses no power at rest unlike analogue amplifiers, and consumes very little power when in use. They are assembled on semi-automated production lines to ensure consistency and reliability.
If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1600P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.
To assist with integration into a fully controlled audio-visual environment these loudspeakers can be controlled with RS-232 (serial) codes.
When power is connected the CS-1600P automatically turns on and remembers the previous input and volume setting. Restoring power brings the loudspeakers back to life automatically.
To satisfy strict fire safety regulations in some countries the CS-1600P have a sheet-metal back-can which enhances Electro-Magnetic Compatibility (EMC) and reduces heat transfer.
These loudspeakers feature a two-way woofer and tweeter design which sounds great in presentation or teaching environments.
If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again.
PRODUCT DIMENSIONS: 260 x 180 mm / 10.2″ x 7.1″ (diameter x height for each speaker)
PACKAGED DIMENSIONS: 592 x 315 x 229 mm / 23.3″ x 12.4″ x 9.0″
CUTOUT SIZE: 222mm / 8.74″
PRODUCT WEIGHT: 4.9 kg / 10.8 lb (per pair)
PACKAGED WEIGHT: 7.2 kg /15.9 lb (per pair)
CONSTRUCTION MATERIAL: Plastic (ABS) + Sheet metal backcan
Amplifier Output: 2 x 30 watts (RMS)
Tweeter: 1.5″ Silk
Output Impedance: 8 ohms
Sensitivity: 89 dB (1w/1m)
Frequency response: 80 Hz-20 kHz
Power Consumption: ≤ 70 w
MASTER LOUDSPEAKER INPUTS:
Input 1: Phoenix connector
Serial Connector: 9-pin D-sub connector (male)
MASTER LOUDSPEAKER OUTPUTS:
Speaker Output: Phoenix connector
Speaker Output (on master): Phoenix connector
SLAVE LOUDSPEAKER INPUTS:
Speaker input (on slave): Phoenix connector
1 x Speaker Cable 5 m (16.4′) long
1 x Remote Control (Battery included: CR2025 3V Li-Mn)
1 x Female Minijack to Phoenix connector cable
1 x Female 2-Phono to Phoenix connector cable
POWER SUPPLY: 100-240v 50/60Hz AC External Power Supply – 24 volt / 2.5 amp.
Laptop-style transformer. Includes 4 x 0.5m figure-8 power cables: UK/EU/US/AU. DC tail length: 4m.
Transformer dimensions: 120 x 56 x 36mm / 4.72″ x 2.2″ x 1.42″
WARRANTY 2-year return to base
ORDER PART CODE: CS-1600P [SAP: 3271426]
SPARE POWER SUPPLY UNIT (PSU): TBC